LCD Rack Mounts

Marshall Electronics


Triple 5.8"Wide Screen Rack Mounted Active Matrix LCD Panel with 3
Composite Video, 3 SDI Inputs and 3 built-in 10-bit D/A Converters

HighResolutionLCD panel, 1200 × 234 pixels, 280,800 total Ultrabright350 candle luminance Switchable4:3and 16:9 ratios Twoinputsper monitor: Composite Video and SDI (SMPTE 259M) 3HighResolution 10-bit SDI to composite video converters (one perchannel) NTSC/PALswitchablevia switch on rear of the unit SDIactiveloop through has active clock recovery with automatic 75 W termination Threecolor,self-powered tally system provided for each panel Individualcolor,tint, brightness and contrast controls for each panel Built-inmemorysaves current setup when unit is powered down Built-inColorBar Generator Unique100degree tilt adjustment while mounted in rack

The V-R63P-SDI is a rack mountable unitthathas three independently controlled 5.8" active matrix LCD panelswithactive loop through feature. These 16:9 high-resolution panelshave apixel count of 1200 x 234, and are rated at a very bright 350candleluminance. Each panel has an SDI and a composite video inputwith aNTSC/PAL switch on the back. Each of the three screens has abuilt-incolor bar generator, controls for color, tint, contrast, andbrightness,and selectable aspect ratio of 16:9 or 4:3. A built-in 3color tallysystem is also provided for each screen. The unit includespower supply,manual and fits into any standard EIA 19" rack, at only3U high.

Display (Viewing Area) 5.8"(5.01"× 2.83") Resolution (Pixels) 1200 H × 234 V Dot Pitch 0.318mm×0.307mm Brightness (in cd/m²) 350cd/m² System NTSC/PALconfig.switch Inputs per panel (total) 1 (3) Composite 1 (3) SDI Dimensions 19.125"W × 5.14"H × 2.5"D Approx. Weight 5 lbs Power Consumption 9 VDC, 3.0 Amps